Real China
-
- Posts: 223
- Joined: Sat Feb 04, 2012 2:41 am
Real China
These screenshots are for a new series that I am producing from 15m satellite imagery suitable for en-route above medium altitude flight simulation such as domestic flights or overseas flights. I am producing the water masks at the moment.
The coverage Map for the first area is shown in the following link.
https://drive.google.com/open?id=1-osT4 ... sp=sharing
These screenshots (v4) show the water masking completed to date.
The coverage Map for the first area is shown in the following link.
https://drive.google.com/open?id=1-osT4 ... sp=sharing
These screenshots (v4) show the water masking completed to date.
-
- Posts: 223
- Joined: Sat Feb 04, 2012 2:41 am
Re: Real China
A few more screenshots.
The shallow "real" imagery water shows under the "sim" water with a nice effect. I have traced waterways inland until they fade out after which imagery waterways will be seen.
The imagery showing under the "sim" water here over Dongshan Dao
Waterway from the imagery seen below the aircraft
Chaonan behind the aircraft
Inland from the offfice over Jieyang
The shallow "real" imagery water shows under the "sim" water with a nice effect. I have traced waterways inland until they fade out after which imagery waterways will be seen.
The imagery showing under the "sim" water here over Dongshan Dao
Waterway from the imagery seen below the aircraft
Chaonan behind the aircraft
Inland from the offfice over Jieyang
- Rob Ainscough
- Posts: 3289
- Joined: Sat Jan 05, 2013 6:46 pm
- Location: Oregon USA
Re: Real China
Very nice blending of water, impressive!
Glad you selected a "different" region for coverage.
Cheers, Rob.
Glad you selected a "different" region for coverage.
Cheers, Rob.
Rob Ainscough
-
- Posts: 223
- Joined: Sat Feb 04, 2012 2:41 am
Re: Real China
The following screenshots are at 34,000ft
Hong Kong area now complete
and inland from the cockpit PMDG 737 in these screenshots. The benefits of this type of scenery for simulation of "higher" altitude flights are 1/ less HD space required 2/ better pc performance 3/ it is real. You only need detail at points of Departure and Arrival
Shortly following departure at 6,500ft
Hong Kong area now complete
and inland from the cockpit PMDG 737 in these screenshots. The benefits of this type of scenery for simulation of "higher" altitude flights are 1/ less HD space required 2/ better pc performance 3/ it is real. You only need detail at points of Departure and Arrival
Shortly following departure at 6,500ft
-
- Posts: 223
- Joined: Sat Feb 04, 2012 2:41 am
Re: Real China
This is the north end of the first release area showing how good the imagery water colours show under the Prepar3d water, V4.2 in these images.You can almost see the fish.
Re: Real China
Looks amazing! Sure to increase the level of immersion.
A suggestion if I may? The ability to include and exclude your photo scenery from Hong Kong and Macau. These cities have their own landclass and higher res photo scenery with payware from other developers. (I realise using layer priority in scenery.cfg works, but the competing landclasses I have for H.K. already don't want to play nicely).
Look forward to when this is ready.
A suggestion if I may? The ability to include and exclude your photo scenery from Hong Kong and Macau. These cities have their own landclass and higher res photo scenery with payware from other developers. (I realise using layer priority in scenery.cfg works, but the competing landclasses I have for H.K. already don't want to play nicely).
Look forward to when this is ready.
-
- Posts: 223
- Joined: Sat Feb 04, 2012 2:41 am
Re: Real China
It would be difficult to patch areas to suit every user but what I will do is release a package containg two versions. One will be full 15m imagery which will show below any detailed area that is selected at a higher level in your scenery library as you mentioned above.F737NG wrote: ↑Tue Jun 05, 2018 12:40 am Looks amazing! Sure to increase the level of immersion.
A suggestion if I may? The ability to include and exclude your photo scenery from Hong Kong and Macau. These cities have their own landclass and higher res photo scenery with payware from other developers. (I realise using layer priority in scenery.cfg works, but the competing landclasses I have for H.K. already don't want to play nicely).
Look forward to when this is ready.
The second option would be a version at a lower LOD such that your default scenery or add-on land class will show below the aircraft whilst the 15m imagery will show further out depending on your LOD setting in the scenery settings and your altitude. In the following video over NSW Australia, ORBX Land Class is seen at lower altitudes whilst my 15m imagery scenery shows in the distance. At higher altitudes the imagery is seen unless you bank or dive. The color matches between these two scenery types is very close and in places the difference is not noticeable.You will notice the ORBX Land Class "kick in" at times whilst descending.
https://www.youtube.com/watch?v=talPgio ... e=youtu.be
Here is a video of full 15m imagery which in my opinion is acceptable to even lower altitudes, but obviously city areas can be blurry at low altitudes. Thus the benefits of high resolution departure and arrival areas.
https://www.youtube.com/watch?v=VNRhdhWkuj8&t=19s
-
- Posts: 223
- Joined: Sat Feb 04, 2012 2:41 am
Re: Real China
A short test flight
https://youtu.be/AupqCBdDXCY
https://youtu.be/AupqCBdDXCY
-
- Posts: 223
- Joined: Sat Feb 04, 2012 2:41 am
Re: Real China
A break from hand tracing coastlines and the hundreds of islands. There are shp files of the coast but I could not find any accurate enough and also there is a lot of recent land reclamation since the shp files were produced.
These are 34,000ft SW of Shanghai
Imagery water showing under the sim water
Default water
These are 34,000ft SW of Shanghai
Imagery water showing under the sim water
Default water
-
- Posts: 223
- Joined: Sat Feb 04, 2012 2:41 am
Re: Real China
I have finally completed this region.
There will be 3 options:-
Option 1/ 15m imagery with imagery water underlying "sim"water". This water belnds with default water at a distance off
the coast
Option 2/ 15m imagery with default water
Option 3/ 15m imagery with default water and a lower LOD on the imagery such that your underlying landclass scenery will
show under
the aircraft and at lower altitudes whilst at higher altitudes the 15m imagery will show unless you bank the
aircraft past a certain bank angle
Option 1
Option 2
Option 3. Landclass is near scenery whilst imagery shows in the distance. The match is hardly noticable.
SW of Shanghai with full imagery to show the natural water colors.
There will be 3 options:-
Option 1/ 15m imagery with imagery water underlying "sim"water". This water belnds with default water at a distance off
the coast
Option 2/ 15m imagery with default water
Option 3/ 15m imagery with default water and a lower LOD on the imagery such that your underlying landclass scenery will
show under
the aircraft and at lower altitudes whilst at higher altitudes the 15m imagery will show unless you bank the
aircraft past a certain bank angle
Option 1
Option 2
Option 3. Landclass is near scenery whilst imagery shows in the distance. The match is hardly noticable.
SW of Shanghai with full imagery to show the natural water colors.
-
- Posts: 223
- Joined: Sat Feb 04, 2012 2:41 am
Re: Real China
I have uploaded to my website http://www.gibsonsceneries.com/ The selling price is $19.95AUD (approx $15USD)
There are three options in the install
1/ Dual Scenery Option
Your Default landclass scenery to show low down with 15m imagery showing in the distance and around the aircraft as
you gain altitude.
2/ 15m Imagery with imagery water "bleed" through "sim" water
3/ Sim water in lieu of item 2
Here is a couple of screenshots with the "Dual Scenery Option. I have ORBX GLOBAL Base Pack and Vector installed so these show near the aircraft whilst imagery shows in the distance. The water here is default sim water.
From the cockpit the 15m imagery is seen.
There are three options in the install
1/ Dual Scenery Option
Your Default landclass scenery to show low down with 15m imagery showing in the distance and around the aircraft as
you gain altitude.
2/ 15m Imagery with imagery water "bleed" through "sim" water
3/ Sim water in lieu of item 2
Here is a couple of screenshots with the "Dual Scenery Option. I have ORBX GLOBAL Base Pack and Vector installed so these show near the aircraft whilst imagery shows in the distance. The water here is default sim water.
From the cockpit the 15m imagery is seen.
-
- Posts: 25
- Joined: Tue Apr 11, 2017 5:11 am
- Location: Sale, VIC, AU
- Contact:
Re: Real China
Looking awesome there Norm! :D
David Love-Brice
Prepar3D Courseware Lead, AIR 5428
Lockheed Martin Australia
Prepar3D Courseware Lead, AIR 5428
Lockheed Martin Australia
-
- Posts: 147
- Joined: Mon Jun 12, 2017 3:12 am
- Location: YSCB
Re: Real China
Will these options become available in your Australian series?
I like your high level NSW scenery but say, when descending into Sydney I would like to see Orbx AU Sydney landclass.
Is this possible?
Aussie
I like your high level NSW scenery but say, when descending into Sydney I would like to see Orbx AU Sydney landclass.
Is this possible?
Aussie
P3d V6: ProSim-AR B737 suite: Fully enc. 737 Cockpit:
ASky6: Orbx world: GSX2: Pilot2ATC: Open Cockpits & Simworld h'dware:
Ext view - 4 LCD monitors, 210' viewgroup from 1x RTX 4080 16Gb. Main i9-13900K MSI 64GB.
ASky6: Orbx world: GSX2: Pilot2ATC: Open Cockpits & Simworld h'dware:
Ext view - 4 LCD monitors, 210' viewgroup from 1x RTX 4080 16Gb. Main i9-13900K MSI 64GB.
-
- Posts: 223
- Joined: Sat Feb 04, 2012 2:41 am
Re: Real China
Aussie,Aussie1234 wrote: ↑Tue Aug 21, 2018 10:17 pm Will these options become available in your Australian series?
I like your high level NSW scenery but say, when descending into Sydney I would like to see Orbx AU Sydney landclass.
Is this possible?
Aussie
I will release the Aussie States to the same "dual" scenery option as China. I have already re-sampled NSW to the lower LOD but need to edit the water masking to better match ORBX.
The following video is over Northern NSW.
https://www.youtube.com/watch?v=talPgio ... e=youtu.be
It will be a free upgrade to purchasers.
Cheers,
Norm
Re: Real China
NormanLGibson wrote: ↑Wed Aug 22, 2018 9:56 am I will release the Aussie States to the same "dual" scenery option as China. I have already re-sampled NSW to the lower LOD but need to edit the water masking to better match ORBX.
[...]
It will be a free upgrade to purchasers.
That's very good to hear. Thank you.
For your next project, will you continue 'up the coast' so to speak, to include the north-east of China covering the provinces next to the Yellow Sea to the borders of Mongolia?
Reason for asking is to discover whether we can have more en-route photo scenery for flights from Europe to Beijing, Shanghai and Hong Kong.
(See the flown routes of BA32, LH728 and BA38).